Attic Insulation Contractor is a cost-effective way to improve your home’s energy efficiency and comfort. It’s an essential part of regulating indoor temperatures and keeping warm air from escaping to the outdoors in the winter. This prevents your heating and cooling system from having to work harder, saving you money on energy bills.

Depending on the climate in your area, you should consider different types of attic insulation to get the best results for your home. The Department of Energy recommends an R-value of between R-30 to R-60 for residential homes. Higher R-values provide even greater insulation benefits.

The Benefits of Spray Foam Insulation for Your Attic

Types of attic insulation include loose-fill, batts and rolls, and spray foam. Loose-fill insulation is made of small fibers blown into the attic space with special equipment and is relatively affordable, although it is prone to settling over time and may require additional top-ups. It’s also important to keep in mind that if you have air vents or other attic fixtures, you need to seal them off before you start insulating.

A good choice for most attic spaces is fiberglass batt or rolls. They’re precut and fit between attic joists and rafters, and are often covered with a vapor barrier to limit moisture and pests. These are inexpensive and easy to install, but they’re not able to seal leaks as well as other attic insulation types.

Spray foam is the most expensive option, but it’s also the most effective. It’s sprayed on the attic floor and expands to fill the space, sealing all gaps and cracks and creating an airtight barrier that prevents heat from escaping or entering your home. It’s also the most versatile insulation, as it can be used to seal around attic doors or hatches and near electrical wires.

Spray Foam Genie Charlotte
635 Atando Ave Suite I, Charlotte, NC 28206, United States
(980) 381-2055

Insulation Contractor is comprised of little pockets of air that create barriers and block heat energy from escaping the building envelope. It’s sprayed onto the surface of the wall or roof, and as it expands, it fills the nooks and crannies that might otherwise be missed by other types of insulation.

The result is a tighter envelope that dramatically reduces energy consumption, leading to lower heating and cooling bills. In fact, the initial investment can be recouped within just a few years in cold climates.

A spray foam seal can also help to reduce airborne pollutants and allergens such as dust mites, mold and pollen, reducing the need for runny noses and antihistamines. As a bonus, it reduces noise from outside the home.

The Long-Term Value of Spray Foam Insulation | Strategic Spray Foam Insulation, LLC

When properly installed, spray foam can offer significant energy savings compared to traditional fiberglass insulation. This is because spray foam can prevent the escape of heated air in the winter and cooled air in the summer, thereby reducing HVAC usage and decreasing energy costs.

Spray foam can be sprayed onto walls in new construction and is often used during the rough-in stage to fill gaps and holes, such as around plumbing and electrical wiring. However, it’s important to note that spray foam shouldn’t be applied directly against electrical wiring or fixtures unless they are rated for contact with insulation. This could cause overheating and pose a fire risk.

Strategic Spray Foam Insulation, LLC
813 W King St, Boone, NC 28607
(919) 842-5925

The spray insulation experts at Desert Spray Foaming have seen firsthand the benefits of using spray foam in Phoenix homes. This product seals your home more effectively than fiberglass or cellulose and can significantly reduce your energy costs. It does this by preventing air leakage, keeping your indoor temperatures stable and saving you money on heating and cooling bills.

Residential Spray Foam Insulation: Enhancing Home Comfort

In order to be effective, spray foam insulation needs to be applied correctly by an experienced installer. Unlike other insulating materials, which are often blown or placed in gaps and cracks, spray foam is applied on-site. This creates a strong bond with the structure to which it’s installed, making it more resilient to wind uplift and damage sustained during high winds.

Spray foam is made of two composite materials, polyurethane and isocyanate, which are sprayed at the same time from the tip of a spray gun. They react to expand and harden on contact, creating a dense air and vapor barrier that provides superior insulation.

This type of insulation has the added benefit of reducing noise. Since the foam’s open cells don’t completely encapsulate each other, they are softer and more flexible than closed cell foam.

Spray foam can be expensive to install. However, the installation process is much quicker than other insulators and it will pay for itself over time through reduced energy costs and improved comfort. The cost of a spray foam project can also be mitigated by opting for low-GWP blowing agents, which have a lower global warming potential (GWP) than carbon dioxide on a per kilo basis.

Desert Spray Foaming
150 Fm 1429 Seminole, TX 79360
432-209-9154